- Home
- Piston Ring Compressor 3-1/2 in. - 7 in.
Piston Ring Compressor 3-1/2 in. - 7 in.
Related Products

1/2 in. Dr. 12mm 12 Point Bit Socket for Head Bolts
$5.99
This 12-Point 12mm Powerbuilt Head Bolt Socket is designed for removing and replacing cylinder head bolts. Fits most Toyota, and older VW/Audi models. Use with a 1/2" drive ratchet . Any automotive specialty tool makes an automotive repair or maintenance task easier, but Powerbuilt takes the concept of ‘help’ a big step further. Every package c...

1/2 in. Dr. 7/8 in. 22mm Oxygen O2 Sensor Socket
$9.99
Remove that hard-to-reach O2 sensor with this 7/8" / 22mm oxygen sensor socket. Simply attach a ratchet or breaker bar to the 1/2" square drive opening, feed the sensor wires through the built-in slot and break that sucker loose. The innovative design adds 2-1/2" of reach to your drive tool It's constructed of impact-rated chromoly steel so it'...

1/2 in. Dr. 8mm Toyota Head Bolt Bit Socket
$5.99
This 12-Point 8mm Powerbuilt Head Bolt Socket is designed for removing and replacing cylinder head bolts. Specially crafted for Paseo, Tercel, and other Toyota models that use #8 bi-hexagonal sockets. Uses a 1/2" drive tool.Any automotive specialty tool makes an automotive repair or maintenance task easier, but Powerbuilt takes the concept of ‘h...

2 Piece Cam Gear Holder Tool Set
$19.99
Changing a timing belt is a tough task. Make it a bit easier with these cam gear clamps. They lock the timing gears in place during belt replacement, preserving valve timing. The universal design makes them easy to use and offers a wide range of applications across many vehicle models. They fit engines with single, dual and quad cams and are id...

2 Piece Double Cup Valve Grinder Set
$9.99
This Powerbuilt double cup valve grinder set is perfect for hand lapping valves and valve seats. Includes a 9" tool with 1-1/8" and 1-3/8" cups and an 8" tool with 5/8" and 13/16" cups. Valve lapping ensures an air-tight seal between the valve and valve seat. The high quality synthetic rubber cups are chemical resistant and built to last. These ...

2 Piece Stretch Belt Installation / Removal Tool Set
$9.99
This handy set makes the tough job of removing and installing stretch drive belts much easier. Simply place the install or removal tool on the front or back of the pulley as needed. Then rotate the pulley until the belt moves over the tool and drops off or onto the pulley. The Universal design fits many pulleys, making this set as versatile ...

3 Piece 4 in. Cylinder Hone Stones (Coarse Grit #120)
$15.99
This is a set of three replacement coarse grit stones and cotter pins for Powerbuilt product #648439 or another cylinder hone deglazer. These high-quality 4" coarse grit stones (#120) are designed to deglaze engines on a cylinder hone. Set also includes corresponding cotter pins. This automotive specialty tool from Powerbuilt will help make the ...

3/8 in. Dr. 10mm 12 Point Bit Socket for Head Bolts
$5.99
This 12-Point 10mm Powerbuilt Head Bolt Socket is designed for removing and replacing cylinder head bolts. Fits some Toyota, Lexus, Pontiac, Mercedes, VW & Audi models. Use with a 3/8" drive ratchet. Any automotive specialty tool makes an automotive repair or maintenance task easier, but Powerbuilt takes the concept of ‘help’ a big step furt...

3/8 in. Dr. 7/8 in. 22mm Oxygen 02 Sensor Wrench
$12.99
Remove that hard-to-reach O2 sensor with this offset oxygen sensor socket. Simply attach a ratchet or breaker bar to the 3/8" square drive opening, feed the sensor wires through the built-in slot and break that sucker loose. It's constructed of impact-rated chromoly steel so it'll stand up to high torque loads. Dependable Powerbuilt sockets m...

4 Piece 3/8 in. Dr. E-Torx Socket Set
$14.99
This socket set features 4 Torx bit sockets forged from high-quality chrome vanadium steel. Variety of sizes so you have the right socket for the task at hand. Designed for use with 3/8" drive ratchets. This set includes E-8 through E-14 sockets and a metal socket rail.Dependable Powerbuilt specialty tools offer power, precision and style. They ...

Adjustable Cylinder Deglazer Hone 2 in. to 7 in.
$32.99
This Powerbuit adjustable hone deglazer is perfect for deglazing engine cylinder walls between 2" and 7" in diameter. This high-quality tool improves performance by ensuring engine cylinder walls hold oil as designed. Features a durable flex shaft and knurled wheel that lets you adjust the pressure of grit stones against the cylinder bore as nee...
Exhaust Pipe Cutting Tool

Exhaust Pipe Cutting Tool
$49.99
This tough Powerbuilt tail pipe cutter is perfect for cutting exhaust pipe up to 6" in diameter. Designed with 12 hardened steel cutters for quick cutting action on exhaust pipes between 3-1/2" to 6". Its PVC handle cover adds comfort and reduces slippage. Any automotive specialty tool makes an automotive repair or maintenance task easier, but P...