- Home
- 2 Piece Chrysler Ball Joint Socket Kit
2 Piece Chrysler Ball Joint Socket Kit
Related Products

1/2 in. Dr. Needle Torque Wrench Kit
$54.99
Measure the torque of bolts, lug nuts and other fasteners safely and accurately with this needle torque wrench. Calibrated for torque up to 150 ft./lbs. (203 N m), this precision torque wrench is set for life and does not need periodic adjustment. Kit includes handy chart for converting foot pounds to newton meters and meter kilograms. Innovativ...

10 Piece Master Ball Joint Service Kit
$144.99
Replacing ball joints is time-consuming enough without having to disassemble half the car to reach them. This innovative tool set is designed to save time and frustration by helping you remove and install press-fit type ball joints without taking the control arm off the vehicle. Strong and dependable enough to last a lifetime. Kit Services: Most...

10 Piece Master Fan Clutch Wrench Kit
$149.99
Remove threaded-on viscous fan clutches on Ford, Chrysler, Jeep and some imported vehicles with these strong heat-tempered steel fan clutch wrenches. The larger wrench keeps the water pump shaft from spinning while you loosen the fan clutch nut with the appropriate smaller wrench. Stylish black finish. Strong and dependable enough to last a life...

10 Piece Master Fan Clutch Wrench Kit
$149.99
Remove threaded-on viscous fan clutches on Ford, Chrysler, GM and imported vehicles with these strong heat-tempered steel fan clutch wrenches. The larger wrench keeps the water pump shaft from spinning while you loosen the fan clutch nut with the appropriate smaller wrench. Stylish black finish. Strong and dependable enough to last a lifetime. K...

11 Piece Fuel And Transmission Line Disconnect Kit
$52.99
Special couplings require special handling. You can’t just pull a fuel line off a fuel filter the way you pull an electrical plug out of an outlet. If you damage the fuel line’s inner mechanism, it may leak or disconnect unexpectedly. Protect your engine’s vital life lines with this innovative 11 Piece Fuel and Transmission Line Disconnect Kit. ...

11 Piece Master Bearing Race And Seal Driver Kit
$92.99
This innovative set allows you to remove and install wheel bearings without damaging them. Set includes 10 wheel bearing inserts in sizes to fit most foreign and domestic vehicles. Just find the right insert, slip on the race and tap the bearing race into place. All pieces fit neatly into a blow mold case, keeping them clean and easy to find. Ki...

14 Piece Master Ball Joint Adapter Kit
$149.99
Created as a companion to the Ball Joint Service Set (Powerbuilt tool #940579), this innovative kit provides extra receiving and installing tubes to expand the make/models of vehicles you can service. Helps to save time and frustration by letting you remove and install press-fit type ball joints without taking the control arm off the vehicle. In...

14 Piece Pulley Remover & Installer Kit
$49.99
Replacing a faulty power steering pump is easier when you have the right tools. This innovative kit has a variety of pins and adapters so you can find the one that is a perfect fit. Set can be used to remove and install both power steering and alternator pulleys. Strong and dependable enough to last a lifetime. Kit Services: Most domestic and im...
18 Piece Master Axle Puller Kit

18 Piece Master Axle Puller Kit
$159.99
Old or rusty axles can be a chore to remove without a little help. This innovative master axle puller kit has hub pullers for both front and rear wheel drive vehicles making it easy to remove stuck axles safely. Set also includes two and three jaw pullers and a slide hammer to give you enough force to remove seals and bearings without damage. Th...

18 Piece Master Disconnect Kit
$99.99
Special couplings require special handling. You can’t just pull a fuel line off a fuel filter the way you pull an electrical plug out of an outlet. If you damage the fuel line’s inner mechanism, it may leak or disconnect unexpectedly. Protect your engine’s vital Protect your engine’s vital lifelines with this innovative 18-piece Master Disconnec...

2 Piece Exhaust Pipe Service Kit
$79.99
Tailpipe broken or full of dents? This kit has everything you need to replace or repair exhaust pipes up to 3-1/2” in diameter in one set. The pipe expander (1-1/2”-2-7/16” diameter) can be used for both expanding pipe and removing dents. The chain cutter can be used for trimming pipe. Any specialty tool will help make an automotive repair or ma...
2 Piece Hub Puller Kit

2 Piece Hub Puller Kit
$79.99
Break frozen front and rear wheel hubs free easily with this front wheel drive/rear wheel drive hub puller set. Features a 3-1/2” deep front hub puller with a 5” spread and a shallower 1/2” deep rear wheel drive hub puller with a 6” spread. Innovative design allows pullers to fit any hub without damaging the lug nut studs. Just attach the approp...